HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 773)

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

ppp pap sent-username <username> password <password>

Use the ppp pap sent-username/password command to configure a username and password when the

peer requires PAP PPP authentication. Use the no form of this command to remove a configured password.

For more information on PAP and CHAP functionality, see the Technology Review section for the

command ppp authentication <protocol> on page 766.

Syntax Description

<username> Alphanumeric string up to 80 characters in length (the username is

case-sensitive)

<password> Alphanumeric string up to 80 characters in length (the password is case-sensitive)

Default Values

By default, there is no defined ppp pap sent-username and password.

Command Modes

(config-ppp 1)# PPP Interface Configuration Mode required

Usage Examples

The following example specifies a PPP PAP sent-username of local and a password of my_password:

(config)#interface ppp 1

(config-ppp 1)#ppp pap sent-username local password my_password

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 773