HP 7000 dl Router Series Guía de usuario Pagina 569

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 941
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 568
SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 569
encapsulation frame-relay ietf
Use the encapsulation frame-relay ietf command to configure the encapsulation on a virtual Frame Relay
interface as IETF (RFC 1490). Currently, this is the only encapsulation setting. Settings for this option
must match the far-end router’s settings in order for the Frame Relay interface to become active.
Syntax Description
No subcommands.
Default Values
By default, all Frame Relay interfaces use IETF encapsulation.
Command Modes
(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required
Usage Examples
The following example configures the endpoint for IETF encapsulation:
(config)#interface frame-relay 1
(config-fr 1)#encapsulation frame-relay ietf
Vista de pagina 568
1 2 ... 564 565 566 567 568 569 570 571 572 573 574 ... 940 941

Comentarios a estos manuales

Sin comentarios