HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 550)

100

101

SROS Command Line Interface Reference Guide G.703 Interface Configuration Command set

test-pattern [511 l clear l insert l ones | qrss l show 511 l show qrss l

zeros]

Use the test-pattern command to activate the built-in pattern generator and begin sending the specified

test pattern. This pattern generation can be used to verify a data path when used in conjunction with an

active loopback. Use the no form of this command to cease pattern generation.

Syntax Description

511 511-bit repeating pattern of ones and zeros.

clear Clears the test pattern error count on the G.703 interface.

insert Inserts an error into the generated test pattern being transmitted on the G.703

interface. The injected error result is displayed using the show 511 command.

ones Generates continous ones.

qrss Inserts a quasi-random signal source test pattern.

show 511 Displays the injected error result.

show qrss Displays the injected QRSS result.

zeros Generates continous zeros.

Default Values

No defaults necessary for this command.

Command Modes

(config-e1 1/1)# T1, DSX-1, E1, or G.703 Interface Configuration Mode required.

(config-e1 1/2)#

Usage Examples

The following example activates the pattern generator for a stream of continuous ones:

(config)#interface e1 1/2

(config-e1 1/2)#test-pattern ones

1 2 ... 545 546 547 548 549 550 551 552 553 554 555 ... 940 941

Comentarios a estos manuales

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 550

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP 7000 dl Router Series