HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 475)

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

port-auth supplicant enable [username <username> | password

Use the port-auth supplicant enable command to enable supplicant functionality and to specify the

username and password used for IEEE 802.1x port authentication. The supplicant is the port that will

receive services from the port authenticator.

Syntax Description

enable Enables supplicant functionality.

username <username> Specifies the username to use during the authentication process. The default

username is username.

password <password> Specifies the password to use during the authentication process. The default

password is password.

Default Values

By default, this command disabled.

Command Modes

(config-interface)# Ethernet Command Mode

Usage Examples

The following example sets the username to User1 and sets the password to securePass for Ethernet

interface 0/2:

(config)#int eth 0/2

(config-eth 0/2)#port-auth supplicant enable username User1 password securePass

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 475