HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 292)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip name-server <server-address1> [server-address2....server-address6]

Use the ip name-server command to designate one or more name servers to use for name-to-address

resolution. Use the no form of this command to remove any addresses previously specified.

Syntax Description

<server-address1-6> Enter up to six name-server addresses.

Default Values

By default, no name servers are specified.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies host 172.34.1.111 as the primary name server and host 172.34.1.2 as the

secondary server:

(config)#ip name-server 172.341.1.111 172.34.1.2

This command will be reflected in the configuration file as follows:

ip name-server 172.34.1.111 172.34.1.2

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 292