HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 512)

100

101

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

loopback remote line [fdl | inband]

Use the loopback remote line command to send a loopback code to the remote unit to initiate a line

loopback. Use the no form of this command to send a loopdown code to the remote unit to deactivate the

loopback.

Syntax Description

fdl Uses the facility data link (FDL) to initiate a full 1.544 Mbps loopback of the signal

received by the remote unit from the network.

inband Uses the inband channel to initiate a full 1.544 Mbps physical loopback (metallic

loopback) of the signal received from the network.

Default Values

No defaults necessary for this command.

Command Modes

(config-t1 1/1)# T1 Interface Configuration Mode required (does not apply to DSX-1 interfaces)

Functional Notes

The following diagram depicts the difference between a line and payload loopback.

Usage Examples

The following example initiates a remote line loopback using the FDL:

(config)#interface t1 1/1

(config-t1 1/1)#loopback remote line fdl

T1 Network Interface

DS1

NI CSU

Payload Loopback

Line Loopback

1 2 ... 507 508 509 510 511 512 513 514 515 516 517 ... 940 941

Comentarios a estos manuales

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 512

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP 7000 dl Router Series