HP 7000 dl Router Series Guía de usuario Pagina 96

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 941
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 95
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 96
debug spanning-tree bpdu [receive | transmit | all]
Use the debug spanning-tree bpdu command to display BPDU (bridge protocol data unit) debug
messages. When enabled, a debug message is displayed for each BPDU packet that is transmitted or
received by the unit.
Syntax Description
receive Displays debug messages for BPDU packets received by the unit.
transmit Displays debug messages for BPDU packets transmitted by the unit.
all Displays debug messages for BPDU packets that are transmitted and received by
the unit.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example displays debug messages for BPDU packets that are transmitted and received by
the unit:
>enable
#debug spanning-tree bpdu all
Vista de pagina 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 940 941

Comentarios a estos manuales

Sin comentarios