HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 757)

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

ip ospf network [broadcast | point-to-point]

Use the ip ospf network command to specify the type of network on this interface.

Syntax Description

broadcast Set the network type for broadcast.

point-to-point Set the network type for point-to-point.

Default Values

By default, Ethernet defaults to broadcast. PPP and Frame Relay default to point-to-point.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

Frame Relay sub-interfaces (fr 1.20), and loopback interfaces

Functional Notes

A point-to-point network will not elect designated routers.

Usage Examples

The following example designates a broadcast network type:

(config-ppp 1)#ip ospf network broadcast

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 757