HP 7000 dl Router Series Guía de usuario Pagina 907

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 941
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 906
Router (OSPF) Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 907
auto-cost reference-bandwidth <rate>
Use the auto-cost reference-bandwidth command to assign a different interface cost to an interface.
It
may be necessary to assign a higher number to high-bandwidth links
.
This value is used in OSPF metric
calculations.
Syntax Description
<rate> Set the default reference-bandwidth rate (range: 1-4294967 Mbps).
Default Values
By default, the rate is set to 100.
Command Modes
(config-ospf)# Router (OSPF) Configuration Mode required
Usage Examples
The following example sets the auto cost reference-bandwidth to 1000 Mbps:
(config)#router ospf
(config-ospf)#auto-cost reference-bandwidth 1000
Vista de pagina 906
1 2 ... 902 903 904 905 906 907 908 909 910 911 912 ... 940 941

Comentarios a estos manuales

Sin comentarios