HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 925)

Common Commands

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 925

Usage Examples

The following example creates a Frame Relay endpoint and binds it to the t1 1/1 physical interface:

1. Create the Frame Relay virtual endpoint and set the signaling method:

(config)#

interface frame-relay 1

(config-fr 1)#

frame-relay lmi-type cisco

2. Create the sub-interface and configure the PVC parameters (including DLCI and IP address):

(config-fr 1)#

interface fr 1.1

(config-fr 1.1)#

frame-relay interface-dlci 17

(config-fr 1.1)#

ip address 168.125.33.252 255.255.255.252

3. Create the tdm-group of 12 DS0s (64K) on the t1 physical interface:

(config)#

interface t1 1/1

(config-t1 1/1)#

tdm-group 1 timeslots 1-12 speed 64

(config-t1 1/1)#

exit

4. Connect the Frame Relay sub-interface with port t1 1/1:

(config)#

bind 1 t1 1/1 1 fr 1

Technology Review

Creating an endpoint that uses a layer 2 protocol (such as Frame Relay) is generally a four-step process:

Step 1:

Create the Frame Relay virtual endpoint (using the interface frame-relay command) and set the signaling

method (using the frame-relay lmi-type command). Also included in the Frame Relay virtual endpoint are

all the applicable Frame Relay timers logging thresholds, encapsulation types, etc. Generally, most Frame

Relay virtual interface parameters should be left at their default state. For example, the following creates a

Frame Relay interface labeled 7 and sets the signaling method to ansi.

(config)#interface frame-relay 7

(config-fr 7)#frame-relay lmi-type ansi

Step 2:

Create the sub-interface and configure the PVC parameters. Using the sub-interface , apply access

policies to the interface, create bridging interfaces, configure backup, assign an IP address, and set the

PVC data-link control identifier (DLCI). For example, the following creates a Frame Relay sub-interface

labeled 22, sets the DLCI to 30, and assigns an IP address of 193.44.69.253 to the interface.

1 2 ... 920 921 922 923 924 925 926 927 928 929 930 ... 940 941

Comentarios a estos manuales

Sin comentarios

Philips 017266693 Datasheet (2 pages)

Brand: Philips | Category: Outdoor lighting | Size: 0.49 MB |

English

Table of contents

Saving energy with ambience

1

Specifications

2

Highlights

2

More products and manuals for Outdoor lighting Philips

Models	Document Type
14653046	Datasheet Philips 01465/30/46, 2 pages
170864746	Datasheet Philips Wall light 17086/47/46, 2 pages
170144786	Datasheet Philips Wall light 17014/47/86, 2 pages
320103146	Datasheet Philips Wall light 32010/31/46, 2 pages
168068776	Datasheet Philips Wall light 16806/87/76, 2 pages
171308746	Datasheet Philips Wall light 17130/87/46, 2 pages
168094776	Datasheet Philips Wall light 16809/47/76, 2 pages
171734746	Datasheet Philips Wall light 17173/47/46, 2 pages
017266631	Datasheet Philips 017266631, 2 pages
171733046	Datasheet Philips Wall light 17173/30/46, 2 pages
171059346	Datasheet Philips Wall light 17105/93/46, 2 pages
171309346	Datasheet Philips Wall light 17130/93/46, 2 pages
170149386	Datasheet Philips Wall light 17014/93/86, 2 pages
170143186	Datasheet Philips Wall light 17014/31/86, 2 pages
17264693	Datasheet Philips 01726/46/93, 2 pages
171504716	Datasheet Philips myGarden Wall light 17150/47/16, 2 pages
171058746	Datasheet Philips Wall light 17105/87/46, 2 pages
016520616	Datasheet Philips myGarden Wall light 01652/06/16, 2 pages
320109346	Datasheet Philips Wall light 32010/93/46, 2 pages
163209316	Datasheet Philips Ledino Wall light 16320/93/16, 2 pages