HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 481)

100

101

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

spanning-tree edgeport

Use the spanning-tree edgeport command to configure the interface to be an edgeport. This command

overrides the related Global setting. Use the no version of the command to return to the default setting.

Syntax Description

No subcommands.

Default Values

By default, this setting is disabled.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet, virtual PPP interfaces (ppp 1), virtual Frame

Relay sub-interfaces (fr 1.20), and atm sub-interfaces (1.2).

Functional Notes

Enabling this command configures the interface to go to a forwarding state when the link goes up.

Usage Examples

The following example configures the interface to be an edgeport:

(config)#interface eth 0/1

(config-eth 0/1)#spanning-tree edgeport

An individual interface can be configured to not be considered an edgeport. For example:

(config)#interface ethernet 0/1

(config-eth 0/1)#spanning-tree edgeport disable

(config)#interface ethernet 0/1

(config-eth 0/1)#no spanning-tree edgeport

1 2 ... 476 477 478 479 480 481 482 483 484 485 486 ... 940 941

Comentarios a estos manuales

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 481

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP 7000 dl Router Series