HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 905)

Router (OSPF) Configuration Command Set

area <area id> range <ip address> <network mask> [advertise |

not-advertise]

Use this command to configure area route summarizations and to determine whether an address range is

advertised to the networks.

Syntax Description

<area id> Identifier for this area. Enter as an integer (range: 0-4294967295) or an IP

address <A.B.C.D>.

<ip address> The IP address of the advertised summary route.

<network mask> The mask of the advertised summary route.

advertise The specified address range will be advertised to other networks.

not-advertise The specified address range will not be advertised to other networks.

Default Values

By default, OSPF is not enabled.

Command Modes

(config-ospf)# Router (OSPF) Configuration Mode required

Usage Examples

(config)#router ospf

(config-ospf)#area 11.0.0.0 range 11.0.0.0 255.0.0.0 advertise

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 905