HP 7000 dl Router Series Guía de usuario Pagina 538

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 941
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 537
SROS Command Line Interface Reference Guide E1 Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 538
remote-loopback
Use the remote-loopback command to configure the interface to accept loopback requests from a remote
unit (or the service provider). Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
No default value is necessary for this command.
Command Modes
(config-interface)# Interface configuration mode.
Functional Notes
This controls the acceptance of any remote loopback requests. When enabled, remote loopbacks are
detected and cause a loopback to be applied. When disabled, remote loopbacks are ignored.
Usage Examples
The following example enables remote loopbacks on the E1 interface:
(config)#interface e1 1/1
(config-e1 1/1)#remote-loopback
Vista de pagina 537
1 2 ... 533 534 535 536 537 538 539 540 541 542 543 ... 940 941

Comentarios a estos manuales

Sin comentarios