HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 353)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree priority <value>

Use the spanning-tree priority command to set the priority for spanning-tree interfaces. The lower the

priority value, the higher the likelihood the configured spanning-tree interface will be the root for the

bridge group. To return to the default bridge priority value, use the no version of this command.

Syntax Description

<value> Priority value for the bridge interface. Configuring this value to a low number

increases the interface’s chance of being the root. Therefore, the maximum

priority level would be 0. Range: 0-65535.

Default Values

<value> 32768

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example sets spanning-tree priority to the maximum level:

(config)#spanning-tree priority 0

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 353