HP 7000 dl Router Series Guía de usuario descargar pdf (Pagina 519)

100

101

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

Use the test-pattern command to activate the built-in pattern generator and begin sending the specified

test pattern. This pattern generation can be used to verify a data path when used in conjunction with an

active loopback. Use the no form of this command to cease pattern generation.

Syntax Description

ones Generates continous ones.

zeros Generates continous zeros.

clear Clears the test pattern error count on the T1 interface.

insert Inserts an error into the generated test pattern being transmitted on the T1

interface. The injected error result is displayed using the show test pattern

command.

p215 Inserts a test pattern that is 32,767 bits in length.

p220 Inserts a test pattern that is 1,048,575 bits in length.

p511 Inserts a 511-bit repeating pattern of ones and zeros.

qrss Inserts a quasi-random signal source.

Default Values

No defaults necessary for this command.

Command Modes

(config-t1 1/1)# T1, DSX-1, E1, or G.703 Interface Configuration Mode required.

(config-t1 1/2)#

Usage Examples

The following example activates the pattern generator for a stream of continuous ones:

(config)#interface t1 1/1

(config-t1 1/1)#test-pattern ones

1 2 ... 514 515 516 517 518 519 520 521 522 523 524 ... 940 941

Comentarios a estos manuales

Sin comentarios

HP 7000 dl Router Series Guía de usuario Pagina 519

Comentarios a estos manuales

Relacionado con productos y manuales para Redes HP 7000 dl Router Series